|
1. Bayonet shell
With the bayonet shell GTB12-FS-HO-S14 standard PCB M12 socket housing can be used and installed.
Thereby it is important to comply with the panel thickness given by GIMOTA.
From an order quantity of approximately 1000 pieces individual bayonet shells can be developed. For
more information please contact GIMOTA.
At the moment HIRSCHMANN provides Switches with GTB-technology. The bayonet receptacle shell
has an M12-thread and a bayonet-ramp, this means that conventional M12-connectors can be connected
too.
 2.Protection cap   3.CICE/CIC mounting clip - for standard C-rails (EMI/insulated) Mounting clips type CICE/CIC allow easy fixing of GTM12 cable connections
with or without grounding of the shield potential. The clips
can be mounted onto standard 35 mm C-rails according EN 50022
(caprail). To avoid potential drop of the shield to ground the clips are
available with insulated clamps.
The mounting clips allow an easy and fast fixation of the GTM12 connectors.
For increased mounting safety a standard cable tie can be
applied at the brackets end.
  Mounting clip with cable tie: add «K» behind the item number (Set) Example: CICE35-12-16K
Application:
The CICE/CIC Mounting Clip can be directly clicked onto the mounting C-rail. The data cable connected with the GTM12 connector system
can be easily pushed into the mounting clip. For increased fixation safety the brackets can be additionally tightened together with a cable tie.
 |